How to use SX50:

Primary Treatments:

Mix 2 cap fulls (30ml) to 1 litre of fresh water in either a bucket or garden sprayer.

Either soak the item to be cleaned in the diluted solution or apply liberally to surface and let Air-Dry. SX50 leaves a corrosion inhibiting coating, protecting your valuable assets from damage between applications.

For marine motors, add SX50 concentrate to the final stage of the flush cycle, ensuring it remains in the cooling galleries. SX50 will break down any salt deposits and protect the cooling system between uses.

Sx50 is easily added to the flush water by using the Auto-Mix Injector. Connect to the motor’s flush system, the flush muffs or via a fresh water connection between the sea cock and the salt water pump on inboard motors. See Auto-Mix Injector for detailed instructions.

Regular Maintenance:

SX50 can be mixed 1 cap full (15ml) to 1 litre fresh water

If fresh water is unavailable, SX50 can be mixed with sea water at double strength: 60ml per litre of sea water

Mix Ratio:

• Primary cleaning: 1 litre to 35 litres fresh water
• Salt Water instead of Fresh Water: Double strength